Product Configurator

Choose the option for which you need piping:

Home Garage/ Small Workshop

Shop Size Under 6,000 sq. ft.
(60 ft. X 100 ft.)

Auto Body, Farm/Ranch, Auto Repair, Light Industrial

Shop Size Over 6,000 sq. ft.
(60 ft. X 100 ft.)

Manufacturing, Heavy Industrial, Distribution Center

Where will the system be placed?

The system will be in the wall

The system will be on the wall/ceiling

The tubing will be buried underground / in concrete

Tell us more about the compressor and distance:

Compressor

What is your compressor horsepower?
hp. (Example: 3, 5, 7.5, 10, 15, 20) This info can be found on the electric motor data plate.

What is the distance in feet from the compressor to the farthest outlet point? Add distance up the wall, along the wall, and down the wall.
ft.

Our recommendations:

MaxLine

We recommend diameter of MaxLine.
(calculation assumes 100 psi operating air system and maximum 5 psi pressure drop)

MaxLine comes in:

  • Continuous length rolls to easily bend in the wall
  • Uses a compression fitting with double oring seal
  • Outlets are designed with rear entry port
MaxLine

We recommend diameter of MaxLine.
(calculation assumes 100 psi operating air system and maximum 5 psi pressure drop)

MaxLine is:

  • Multi-layer tubing and comes in continuous length rolls
  • Uses nickel plated brass compression fittings
  • Good for layouts with many obstructions as you can form it around obstacles
  • Cost effective

OR

FastPipe

We recommend diameter of FastPipe
(calculation assumes 100 psi operating air system and maximum 5 psi pressure drop)

FastPipe:

  • Rigid aluminum pipe
  • Good for straight runs with minimal obstructions
  • Professional look
FastPipe

We recommend diameter of FastPipe
(calculation assumes 100 psi operating air system and maximum 5 psi pressure drop)

FastPipe

  • Rigid aluminum pipe
  • Good for straight runs with minimal obstructions
  • Professional look
MaxLine

We recommend diameter of MaxLine
(calculation assumes 100 psi operating air system and maximum 5 psi pressure drop)

MaxLine is:

  • Multi-layer tubing and comes in continuous length rolls
  • Uses nickel plated brass compression fittings
  • Rated for direct burial underground
  • Cost effective

Other things I need:

What is the total feet of tubing needed including main line, drops and compressor hookup?
ft.

Number of outlets needed:

I am doing a complete loop around my shop, starting and ending at the compressor joining with a tee fitting

Number of elbows I will need for the install (MaxLine tubing can be bent in a sweep to form corners) (FastPipe elbow fittings are needed)".

0
    Your Cart
    Your cart is empty